Forsaire Counterflow Wall Furnace
The practical choice for those areas where natural or propane gas is not
convenient to install. It provides low cost, floor to ceiling comfort
(31,400 Btu/hr), is thermostatically controlled, and is ideal for basements
and room additions.
Freestanding or Recessed Mounting
v - 33.22/38.33 Amps
x 7" D x 14 1/8" W
Shipped assembled for installation on any exterior or interior wall. It may
be recessed up to 5-3/8 inches (137 mm) with studs spaced 16 inches (406 mm)
on center, or it may be mounted directly on the wall surface.
Rated for 9.2 kW (31,400 Btu) at 240 volts, single phase and 7.0 kW (23890
Btu) at 208 volts single phase.
This heater works by drawing cool air in at the top grille inlet and pushing
it with a fan downward over the heating element. Warm air is discharged into
the room through the bottom grille outlet near the floor. The warm air at
the floor creates a gentle convective process in the room, preventing
stratification of warm air near the ceiling and ensuring comfort for the
The Williams Counterflow Wall Furnace is controlled by an optional wall mounted
thermostat. The unit is made of heavy gauge steel with a
durable baked powder coat finish.
Please consider any of the following thermostats: TH140-28-01-B, TH1100DV1000/U, TH1100DH1004/U, TH135-01B, P322016 or P332493. Each of these can be found on our Thermostat & Controls web page on this site.